Formuler is the easier of the two, using its built-in MYTVOnline app. Enigma2 receivers (Vu+, Zgemma, Dreambox, Octagon and others) need a one-off command from a computer. If that sounds daunting, we’ll do it with you on WhatsApp.
What you need
- A Formuler or Enigma2 box connected to your router with Ethernet
- Your GoLiveOnTV login (sent on WhatsApp after you order)
- For Enigma2: a computer on the same network
- About 6 minutes
Pick a method
Both work with the same login. If you’re not sure, start with the first one.
Method 1
Formuler: MYTVOnline
Built inFormuler’s own IPTV app, already installed. It logs in with the box’s MAC address, like a MAG.
- Login:
- MAC address + portal URL
- Best for:
- Formuler Z11 Pro Max, Z11 Pro, Z10 Pro, Z8 and similar
- 1
Find your MAC address
Open MYTVOnline (MYTVOnline 3 on newer boxes). The MAC address is shown on the add-portal screen, and also under Settings › About. Send it to us on WhatsApp.
- 2
Add a connection
Once we confirm it’s activated, go to Add portal (or Connection › Add). Enter GoLiveOnTV as the nickname and the portal URL we sent you.
- 3
Connect
Select Connect. Channels and the TV guide load within a minute or two.
Method 2
Enigma2: channel list install
AdvancedAdds your channels as “bouquets” in the receiver’s own channel list, so they work with the normal remote and guide. Plugins such as e2m3u2bouquet do the same job.
- Login:
- Command we send you (uses your Xtream details)
- Best for:
- Vu+, Zgemma, Dreambox, Octagon and other Enigma2 receivers
- 1
Find your box’s IP address
On the receiver, go to Menu › Setup › System › Network › Adapter settings and note the IP address (for example 192.168.1.50).
- 2
Connect from your computer
On Windows, open PuTTY (free) and connect to the IP address using Telnet or SSH. On Mac, open Terminal and type ssh root@ followed by the IP address. Log in as root; there is usually no password unless you set one.
- 3
Paste your command
Paste the one-line command we send you and press Enter. It downloads your channel list and adds it to the receiver as bouquets. We tailor it to your box’s image (OpenATV, OpenPLi, VTi and others).
- 4
Restart the GUI
On the receiver, go to Menu › Standby / Restart › Restart GUI. Your new bouquets appear in the channel list.
Which method should you choose?
| Method | Cost | Login | Best for |
|---|---|---|---|
| Formuler: MYTVOnline | Built in | MAC address + portal URL | Formuler Z11 Pro Max, Z11 Pro, Z10 Pro, Z8 and similar |
| Enigma2: channel list install | Advanced | Command we send you (uses your Xtream details) | Vu+, Zgemma, Dreambox, Octagon and other Enigma2 receivers |
Troubleshooting
Formuler shows “MAC not registered”
Your MAC isn’t activated yet. Send us a photo of the MAC shown in MYTVOnline (not the one on the box’s sticker, which can differ).
Enigma2 bouquets appear but channels won’t play
Your receiver may need a service app update. Tell us your box model and image and we’ll send the right fix.
The TV guide is empty on Enigma2
Install the EPG importer plugin from your image’s plugin menu. We’ll send the EPG source to add.
Enigma2 & Formuler: frequently asked questions
Formuler or Enigma2: which is easier?
Formuler, by a long way. MYTVOnline is built in and setup takes a few minutes. Enigma2 suits people who already use a satellite receiver and want everything in one channel list.
Will installing bouquets affect my satellite channels?
No. Your IPTV channels are added as separate bouquets alongside your existing ones.